The Shapewatch kiosk measures in at 43x43x139cm, while the Shapewatch weighing scale is 32x32x3cm, and as such the unit is highly portable. The Shapewatch mat measures 82x60 cm and is almost flat, meaning that it can be left in position even when the scanner is not in usage.
When in use, i.e. a scan has been initiated, a space of 250-300cm is required in front of the kiosk that only the person being scanned should be positioned within. If objects appear in between the kiosk and the person being scanned, the camera and depth sensor cannot see the person being scanned and cannot therefore complete the scan. Objects further back than 300cm will not interfere with the scanning process. The width of the scanning zone is 100cm on either side of the kiosk, so in total the scanner while in use requires 6 sq. metres of available floor space.