Before first time usage, please insert the batteries at the back of the weighing scale.
Now initiate the calibration process to calibrate the weighing scale.
Please be aware that the following process should be completed every time the weighing scale has been moved or stored away.
- Step on to the weighing scale in order to turn them on
- Step off the scale for the calibration to start. The scale will power off once calibration is finished, which should be done in around 2 seconds.
- The calibration is done and the weighing scale is ready to be used.
NB. It is important not to move the scales during this calibration process until they have powered off again.
This process should not be performed after the Shapewatch scanning process has commenced, i.e after a user has scanned their QR code on the Shapewatch scanner, as this may result in un-calibrated data being sent to the Shapewatch scanner. Should this occur, simply cancel the scan on the Shapewatch scanner and restart the scanning process by creating and scanning a new QR code.